Similar Articles

Browse Main Topics:

Business
Computers & Electronics
Education & Reference
Entertainment & Leisure
Family & Home
Finance & Investment
Health
Internet
Pets & Animals
Science & Technology
Society, Politics & Culture
Sports & Recreation

Similar Articles

U.S. CPSC July 22, 2008	Indoor Lighting Fixtures Recalled by Lithonia Lighting Due to Fire Hazard A thermal protector could be missing from the lighting fixtures, posing a risk of overheating and fire.
U.S. CPSC May 23, 2006	Light Fixtures Recalled After Reports of Units Falling Two nuts in a mounting mechanism of these light fixtures were not attached. The fixture could detach, fall and possibly hit consumers.
U.S. CPSC August 27, 2008	Indoor Lighting Fixtures Recalled by Lithonia Lighting Due to Impact Hazard The glass reflector can separate from the fixture and fall, posing a risk of injury to consumers below the fixture.
U.S. CPSC March 19, 2008	Progress Lighting Recalls Ceiling-Mounted Outdoor Light Fixtures; Lights Can Fall Off Mounting and Injure Consumers A weld that affixes a mounting bracket to the ceiling pan can fail, which can cause the fixture to fall and injure nearby persons.
U.S. CPSC August 15, 2006	Gotham Light Fixtures Recalled Due to Risk of Falling Parts The lower portion of the reflector/trim assembly could detach and fall from the ceiling, striking consumers.
U.S. CPSC March 11, 2005	Lithonia Lighting Recall of Indoor HID Light Fixture Cords The cord of the light fixture can drip plasticizer fluid onto the light fixture, which can degrade the acrylic reflector, causing it to crack and fall. Falling pieces of acrylic can injure a person below the fixture.
U.S. CPSC October 9, 2007	Fluorescent Ceiling Light Fixtures Sold Exclusively at Home Depot Recalled by Lithonia Lighting Due to Shock Hazard A wire inside the light fixture could be loose, posing an electrical shock hazard to consumers.
U.S. CPSC August 7, 2008	Progress Lighting Recalls Indoor Light Fixtures; Lights Can Unexpectedly Fall Posing an Impact Hazard The ceiling-mount assembly that supports the light fixture can fail, causing the fixture to unexpectedly fall and injure consumers.
U.S. CPSC June 10, 2008	Progress Lighting Recalls Ceiling-Mounted Indoor Light Fixtures; Lights Can Fall Posing an Impact Hazard A cable that supports the light fixture from the ceiling can fail, causing the fixture to fall and injure nearby consumers.
U.S. CPSC November 21, 2007	Cooper Lighting Recalls Fluorescent Shop Lights Due to Electrical Shock Hazard When the two prongs on the plug's electrical cord are touched simultaneously while lamps are installed, the light can pose an electric shock hazard to consumers.
U.S. CPSC September 23, 2008	Gotham Lighting Recalls Compact Fluorescent Recessed Ceiling Lights; Can Fail to Work in an Emergency The relay on the backup battery of the lights could be programmed incorrectly and prevent the lights from functioning in an emergency.
U.S. CPSC May 22, 2003	Ceiling Light Fixtures Recalled by Sea Gull Lighting Inc. The wiring in the lights can short, posing a fire hazard to consumers.
U.S. CPSC September 2, 2004	Target Recall of Electric Scooters Improper wiring can cause a short circuit, posing a fire hazard in the scooter. In addition, inadequate insulation may expose electrical wiring, which poses a shock hazard.
U.S. CPSC October 25, 2006	Streetlights Recalled by Beacon Products Due to Injury Hazard to Passersby The lighting fixtures could fall from their lamp posts due to a problem with the coupling system used to secure them. This poses a risk of injury for persons beneath the fixtures.
U.S. CPSC February 15, 2005	Sea Gull Lighting Products Recall of Ceiling Light Fixtures Due to a manufacturing defect in a component part, the light fixture could fall and strike a person beneath the light fixture. The fixture also poses a laceration risk if the lamp breaks.
U.S. CPSC April 30, 2010	Chain Sets Sold with Commercial Light Fixtures Recalled by Cooper Lighting Due to Injury Hazard An "S" hook on the chain connecting the fixture to the ceiling can straighten when subjected to high impact forces, resulting in the light fixture falling. This poses an injury hazard to consumers.
U.S. CPSC December 15, 2006	Square D Recalls Safety Switches Due to Shock or Electrocution Hazard The safety switch can continue to supply electricity even after being placed in the "OFF" position. This poses the risk of an electric shock or electrocution hazard to consumers.
U.S. CPSC April 29, 2009	HMI Industries Recalls Floor Cleaners Due to Burn Hazard The recalled cleaners' wiring can overheat, causing electrical arcing and melting. This poses a burn hazard to consumers.
U.S. CPSC December 28, 2006	Trim Assembly Kits for Recessed Light Fixtures Recalled By Progress Lighting Due To Risk of Falling Parts Heat from the light bulb can cause the fixture's plastic trim to soften and melt, causing the trim and lens to fall. This can result in laceration injuries to nearby consumers. Models were made in China and have model numbers: 8009-60, 8010-60 or 8011-60.
U.S. CPSC February 10, 2004	Fluorescent Light Fixtures Recalled by Progress Lighting The lamp holders on the fluorescent lights can overheat, causing the fixture to melt or burn, presenting a fire hazard.
U.S. CPSC May 17, 2007	Currey & Company Recalls Lamps Due to Shock, Fire Hazards The light sockets on these lamps have a defect, which poses electrical shock and fire hazards.
U.S. CPSC November 16, 2006	Desk Lamps Sold at Office Depot Recalled for Shock Hazard The sheath that protects the electrical cord can become improperly aligned during lamp assembly, posing a shock hazard to consumers.
U.S. CPSC June 21, 2005	DeWALT Recall to Repair Air Compressors Due to a wiring insulation defect, the unit may pose a possible shock hazard.
U.S. CPSC December 13, 2001	Homemaster Recalls Outdoor Lighting Timers Outdoor Lighting Timers have reversed polarity in the wiring, potentially allowing a current to flow through a consumer's body, posing a shock hazard to consumers...
U.S. CPSC March 29, 2004	Lithonia Lighting Recall of Indoor HID Light Fixtures A component in the light fixture can leak fluid, which can degrade the acrylic lenses and reflectors, causing them to crack and fall. Falling pieces of acrylic can injure someone below the fixture.
U.S. CPSC December 30, 2008	Faulty Instructions Prompt Recall of Electrical Wiring How-to-Books by The Taunton Press; Shock Hazard to Consumers The books contain several errors in the technical diagrams that could lead consumers to incorrectly install or repair electrical wiring, posing an electrical shock hazard to consumers.
U.S. CPSC September 8, 2009	Bandsaws Recalled by Grizzly Industrial Due to Shock Hazard Some of the recalled bandsaws do not have a grounding wire installed, which poses an electric shock hazard to consumers.
U.S. CPSC November 18, 2008	Lithium-Ion Batteries Used with Bicycle Lights Recalled By DiNotte Lighting Due to Burn Hazard A loose wiring connection and improper venting can cause the battery to overheat, posing a burn hazard to consumers.
U.S. CPSC August 9, 2011	Emergency Exit Signs Recalled by Best Lighting Products Due to Failure to Illuminate The fixtures can malfunction and fail to illuminate in the event of a power failure. This could result in a failure to provide adequate lighting to guide building occupants to an exit in the event of an emergency.
U.S. CPSC December 21, 2006	DEWALT Recalls Cut-Out Tools Due to Shock Hazard The cord wire in these units could be damaged internally, posing a shock hazard to consumers.
U.S. CPSC March 8, 2005	Lithonia Lighting Recall of Indoor HID Light Fixtures A component in the light fixture can leak fluid, which can degrade the acrylic lenses and reflectors, causing them to crack and fall. Falling pieces of acrylic can injure someone below the fixture.
U.S. CPSC December 10, 2009	OSRAM SYLVANIA Recalls Portable Nightlights Due to Electric Shock Hazard The bottom plastic cover on the recharging base of the portable nightlight can break, exposing internal electrical components. This poses an electric shock hazard to consumers.
U.S. CPSC December 29, 2006	Trim Assembly Kits for Recessed Light Fixtures Recalled By Prescolite Inc. Due to Risk of Falling Parts Heat from the light bulb can cause the fixture's plastic trim to soften and melt, causing the trim and lens to fall. This can result in laceration injuries to nearby consumers. Models were made in China and have model numbers: TL60 and TL62.
U.S. CPSC December 23, 2003	Family Dollar Services Inc. Recall of Extension Cords Use of these extension cords could result in an electric shock or electrocution to consumers.
U.S. CPSC August 28, 2007	Wolverine Recalls Caterpillar Logger Boots; Can Pose Shock Hazard To User Due to Mislabeling The recalled logger boots could be incorrectly labeled as resistant to electrical current. This poses a shock hazard to consumers who come in contact with an electrical current.
U.S. CPSC August 16, 2006	Tu-Wire(R) Dimming Ballasts Used With Compact Fluorescent Lights Recalled for Shock Hazard If not properly grounded, these ballasts can present a risk of electric shock to persons who come in contact with the ballast or with a light fixture that incorporates the ballast.
U.S. CPSC March 19, 2008	Salton Inc. Recalls Electric Toasters Due to Fire Hazard The toaster can turn on without bread in the slots and ignite items placed on top of it, posing a fire hazard.
U.S. CPSC June 3, 2004	Electrolux Home Products Recall of Air Conditioning/Heating Units The heating coil in the units can be damaged during assembly, causing an electrical short and overheating, which poses a fire hazard to consumers.
U.S. CPSC August 12, 2008	Cooper Lighting Recalls Emergency and Exit Lights; Could Fail to Stay Illuminated in an Emergency The lights can malfunction and not stay illuminated in the event of a power failure. This could result in a failure to provide adequate lighting to guide building occupants to an exit in an emergency.
U.S. CPSC May 25, 2006	Lighted Mirror Sold at Wal-Mart Recalled for Shock Hazard Exposed wires inside the mirror could pose an electrical shock hazard to the user when they touch the mirror.
U.S. CPSC June 8, 2004	Targus Recall of International Plug Adapters The adapters may have an electrical wiring problem, posing a shock and fire hazard to consumers.
U.S. CPSC April 18, 2007	Lamson & Sessions Recalls Floor Electrical Outlets Due to Shock or Electrocution Hazards The recalled floor boxes are wired incorrectly resulting in reverse polarity. This poses a shock or electrocution hazard to consumers.
U.S. CPSC February 11, 2008	General Electric Recalls Gas Dryers Due to Shock Hazard A short circuit in the dryer's wiring poses a shock hazard to consumers with ungrounded dryers.
U.S. CPSC June 15, 2004	Basler Electric Co. and Lutron Electronics Recall of Power Supply Units The power supply, if overloaded, can overheat, posing a fire hazard to consumers.
U.S. CPSC October 6, 2004	New York Zion Trading Corp. Recall of Electric Fans The wiring is undersized and the power plug is not polarized, creating fire and shock hazards.
U.S. CPSC March 8, 2011	Sanus Elements Surge Protectors Recalled by Milestone AV Technologies Due to Shock Hazard Improper grounding of the case and inadequate insulation for the circuit breaker poses an electrical shock hazard to consumers.
U.S. CPSC August 22, 2008	Power Light Modules Recalled by GCI Technologies Due to Fire and Burn Hazards Internal wiring in the module's circuit boards is incorrectly installed, posing a risk of an electrical fire and burn hazards to consumers.
U.S. CPSC September 30, 2008	Wal-Mart Recalls General Electric Toasters Due to Fire and Shock Hazards An electrical short circuit can occur between the heating element and the bread cage, posing a fire and electrical shock hazard to consumers.
U.S. CPSC January 4, 2007	DEWALT Recalls Portable Generators Due to Electric Shock Hazard A ground fault circuit interrupter (GFCI) installed on the generator could fail to operate properly, posing a risk of electric shock to consumers.
U.S. CPSC May 10, 2006	Hoshino USA Inc. Recall to Repair Electric Bass If the battery is improperly installed, the bass can overheat causing internal damage and a fire hazard.